Zugriff auf neue/zusätzliche Festplatte mit PLESK

mardi 18 juillet 2017

Hallo Zusammen

Ich muss gestehen, habe die gleiche Anfrage bereit in ein anderes Forum gestellt. Da kam aber wenig Resonanz zurück und es antwortet auch niemand mehr. Deswegen erlaube ich mir die Frage auch hier zu stellen:
Ich habe auf meinem CentOS-Root-Server zwei zusätzliche Festplatten installieren lassen. Wobei "installieren" das falsche Wort ist. Man hat sie einfach reingesteckt.

Danach habe ich die Partitionierung im Filesystem ext2 gemacht. Soweit alles OK.
Neue Konfiguration:

2x 500 GB
2x 2'000 GB

Wenn ich nun unter Plesk (V10) die Serverinformationen anschaue, sehe ich folgendes:
Code:

/dev/sda2        917 944.98 MB                647 974.84 MB        222 588.98 MB                70.59%
/dev/sdc1        1 877 791.36 MB                195.47 MB                1 782 209.56 MB                0.01%
/dev/sdd1        1 877 791.36 MB                195.47 MB                1 782 209.56 MB                0.01%

Platten werden erkannt. Ich kenn mich in Plesk aber nicht so gut aus, vermute aber, dass ich die Platten gar nicht nutzen kann um z.B. Daten über FTP Daten abzuspeichern.

Fragen:
  • Kann ich die Platten nutzen über FTP?
  • Wenn nein: Wie kann ich die neuen Platten als zusätzlchen Speicherplatz zu sda2 nutzen?


Ausgabe von "df":
Code:

[root@server1 ~]# df
Filesystem          1K-blocks      Used Available Use% Mounted on
/dev/sda2            939975660 663529896 227927456  75% /
/dev/sda5              2030736    45040  1880876  3% /tmp
/dev/sda1              101086    13076    82791  14% /boot
tmpfs                  1962184        0  1962184  0% /dev/shm
/dev/sdc1            1922858352    200164 1824982588  1% /userdata
/dev/sdd1            1922858352    200164 1824982588  1% /userdata
/dev/sdd1            1922858352    200164 1824982588  1% /userdatax
/dev/sdc1            1922858352    200164 1824982588  1% /userdata

Ausgabe von "fdisk -l":
Code:

[root@server1 ~]# fdisk -l

Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

  Device Boot      Start        End      Blocks  Id  System
/dev/sda1  *          1          13      104391  83  Linux
/dev/sda2              14      120818  970366162+  83  Linux
/dev/sda3          120819      121340    4192965  82  Linux swap / Solaris
/dev/sda4          121341      121601    2096482+  5  Extended
/dev/sda5          121341      121601    2096451  83  Linux

Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

  Device Boot      Start        End      Blocks  Id  System

Disk /dev/sdc: 2000.3 GB, 2000398934016 bytes
255 heads, 63 sectors/track, 243201 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

  Device Boot      Start        End      Blocks  Id  System
/dev/sdc1              1      243201  1953512001  83  Linux

Disk /dev/sdd: 2000.3 GB, 2000398934016 bytes
255 heads, 63 sectors/track, 243201 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

  Device Boot      Start        End      Blocks  Id  System
/dev/sdd1              1      243201  1953512001  83  Linux

Im anderen Forum wurde ich auf die fehlende RAID-Config angesprochen. Das ist auch richtig und mir bewusst, dass die aktuelle Config riskant ist. Es beantwortet jedoch nicht meine Frage.
Wäre für jede Hilfe dankbar.


0 commentaires:

Enregistrer un commentaire

 

Lorem

Ipsum

Dolor