k3b bricht mit underrun error ab, auch bei CD und 4x Speed

Ich habe einen USB-Brenner:

CD-ROM PIONEER BD-RW BDR-TD04A 1.00 PQ: 0 ANSI: 0
[sr0] scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray

unter Ubuntu 16.04, auf einem neuen PC mit einem i7 6700k, X11SAE und 64 GiB RAM aber Brennversuche werden beendet durch underrun error, auch bei CD und 4x Speed :mad:

Das automatisch von k3b gewählte Temporär-Verzeichnis ist vorhanden und beschreibbar.
Testweise habe ich k3b auch als root gestartet, aber das gleiche Ergebnis:

Code:

---

Devices
-----------------------
PIONEER BD-RW  BDR-TD04A 1.00 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, BD-ROM, BD-R, BD-RE, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW, BD-ROM, BD-R Sequential (SRM), BD-R Random (RRM), BD-RE] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite, Random Recording, Sequential Recording, Sequential Recording + POW] [%7]

System
-----------------------
K3b Version: 2.0.3
KDE Version: 4.14.16
QT Version:  4.8.7
Kernel:      4.6.5-040605-lowlatency

Used versions
-----------------------
cdrecord: 1.1.11

cdrecord
-----------------------
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.11
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 1 = CD-ROM
Driveropts: 'burnfree'
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities  :
Vendor_info    : 'PIONEER '
Identification : 'BD-RW  BDR-TD04A'
Revision      : '1.00'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009 (CD-R)
Profile: 0x0043 (BD-RE)
Profile: 0x0042 (BD-R random recording)
Profile: 0x0041 (BD-R sequential recording)
Profile: 0x0040 (BD-ROM)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001A (DVD+RW)
Profile: 0x001B (DVD+R)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0002 (Removable disk)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R) (current)
Profile: 0x0008 (CD-ROM)
Profile: 0xFFFF ()
Using generic SCSI-3/mmc  CD-R/CD-RW driver (mmc_cdr).
Driver flags  : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1206272 = 1178 KB
FIFO size      : 12582912 = 12288 KB
resid: 60
Speed set to 706 KB/s
Track 01: data  700 MB       
Total size:      804 MB (79:44.81) = 358861 sectors
Lout start:      805 MB (79:46/61) = 358861 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 5
  Is not unrestricted
  Is not erasable
  Disk sub type: Medium Type B, low Beta category (B-) (4)
  ATIP start of lead in:  -11607 (97:27/18)
  ATIP start of lead out: 359849 (79:59/74)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 18
Manufacturer: Plasmon Data systems Ltd.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 988
Starting to write CD/DVD at speed  4.0 in real SAO mode for single session.
Last chance to quit, starting real write in    2 seconds.
  1 seconds.
  0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... resid: 60
resid: 60
input buffer ready.
Performing OPC...
Sending CUE sheet...
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB:  2A 00 FF FF FF 6A 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0E 00 00 00 00 21 02 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 63488
cmd finished after 0.001s timeout 200s
Writing pregap for track 1 at -150
write track pad data: error after 0 bytes
BFree: 1114 K BSize: 1178 K
Starting new track at sector: 0
Track 01:    0 of  700 MB written.
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB:  2A 00 00 00 00 00 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0E 00 00 00 00 21 02 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 63488
cmd finished after 0.001s timeout 200s
/usr/bin/wodim: The current problem looks like a buffer underrun.
/usr/bin/wodim: It looks like 'driveropts=burnfree' does not work for this drive.
/usr/bin/wodim: Please report.
/usr/bin/wodim: Make sure that you are root, enable DMA and check your HW/OS set up.
write track data: error after 0 bytes
Writing  time:  15.272s
Average write speed 952.9x.
Fixating...
Errno: 5 (Input/output error), flush cache scsi sendcmd: no error
CDB:  35 00 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 00 00 0E 00 00 00 00 0C 00 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 39.914s timeout 200s
Trouble flushing the cache
Fixating time:  40.152s
/usr/bin/wodim: fifo had 191 puts and 1 gets.
/usr/bin/wodim: fifo was 0 times empty and 0 times full, min fill was 100%.

cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=4 -sao driveropts=burnfree -data -tsize=358861s -

---

An einer USB3-Buchse funktioniert der Brenner nicht, mit Fehlermeldungen wie:
scsi 8:0:0:0: rejecting I/O to offline device
scsi 8:0:0:0: killing request
can't restore configuration #1 (error=-71)
can't set config #1, error -71

Er funktioniert aber ohne solche Fehlermeldungen an USB2-Buchsen.
Die Hardware ist intakt, zumindest wenn ich den Brenner über USB2 anschließe: Auslesen von DVDs ist problemlos und unter Win7 kann ich DVDs und CDs brennen mit CDBurnerXP.
Wieso bricht das Brennen mit k3b ab? :confused: