Hallo zusammen,
nachdem ich gestern Abend noch über den Stick ferngesehen habe, will er seit heut morgen nicht mehr.
Folgende Angaben kann ich machen:
Es wurde kein Update irgendwelcher Art gemacht.
Die Ausgaben von dmesg, lsmod und lsusb wie folgt
DMesg
LSMOD
LSUSB
Der Stick ist doch einwandfrei geladen. Oder nicht?
Kaffeine sagt allerdings, auch wenn das Gerät in den Einstellungen angezeigt wird, "No device found"
Auch w_scan sagt
VDR ist nicht installiert.
nachdem ich gestern Abend noch über den Stick ferngesehen habe, will er seit heut morgen nicht mehr.
Folgende Angaben kann ich machen:
Es wurde kein Update irgendwelcher Art gemacht.
Die Ausgaben von dmesg, lsmod und lsusb wie folgt
DMesg
Code:
[ 1.171526] usbcore: registered new interface driver usbfs
[ 1.171536] usbcore: registered new interface driver hub
[ 1.176067] pata_amd 0000:00:06.0: version 0.4.1
[ 1.178342] usbcore: registered new device driver usb
[ 1.178762] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.179419] ehci-pci: EHCI PCI platform driver
[ 1.179457] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.181946] scsi0 : pata_amd
[ 1.182066] scsi1 : pata_amd
[ 1.182111] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 1.182113] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 1.182265] [drm] Initialized drm 1.1.0 20060810
[ 1.182277] sata_nv 0000:00:08.0: version 3.5
[ 1.182529] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[ 1.182968] scsi2 : sata_nv
[ 1.183060] scsi3 : sata_nv
[ 1.183092] ata3: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 21
[ 1.183093] ata4: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 21
[ 1.183265] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
[ 1.183552] scsi4 : sata_nv
[ 1.183622] scsi5 : sata_nv
[ 1.183655] ata5: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc000 irq 20
[ 1.183656] ata6: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xc008 irq 20
[ 1.183747] ehci-pci 0000:00:02.1: EHCI Host Controller
[ 1.183754] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 1.183762] ehci-pci 0000:00:02.1: debug port 1
[ 1.183793] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[ 1.183811] ehci-pci 0000:00:02.1: irq 22, io mem 0xf7ffec00
[ 1.184573] wmi: Mapper loaded
[ 1.189203] checking generic (f9000000 280000) vs hw (e0000000 10000000)
[ 1.189207] checking generic (f9000000 280000) vs hw (f8000000 2000000)
[ 1.189208] fb: switching to nouveaufb from VESA VGA
[ 1.189237] Console: switching to colour dummy device 80x25
[ 1.190203] ACPI: PCI Interrupt Link [LNED] enabled at IRQ 19
[ 1.190813] nouveau [ DEVICE][0000:02:00.0] BOOT0 : 0x086100a2
[ 1.190817] nouveau [ DEVICE][0000:02:00.0] Chipset: G86 (NV86)
[ 1.190818] nouveau [ DEVICE][0000:02:00.0] Family : NV50
[ 1.190842] nouveau [ VBIOS][0000:02:00.0] checking PRAMIN for image...
[ 1.195050] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 1.195112] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.195114] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.195116] usb usb1: Product: EHCI Host Controller
[ 1.195117] usb usb1: Manufacturer: Linux 3.16.7-7-default ehci_hcd
[ 1.195119] usb usb1: SerialNumber: 0000:00:02.1
[ 1.195244] hub 1-0:1.0: USB hub found
[ 1.195249] hub 1-0:1.0: 10 ports detected
[ 1.235429] nouveau [ VBIOS][0000:02:00.0] ... appears to be valid
[ 1.235431] nouveau [ VBIOS][0000:02:00.0] using image from PRAMIN
[ 1.235532] nouveau [ VBIOS][0000:02:00.0] BIT signature found
[ 1.235534] nouveau [ VBIOS][0000:02:00.0] version 60.86.26.00.09
[ 1.255542] nouveau 0000:02:00.0: irq 43 for MSI/MSI-X
[ 1.255549] nouveau [ PMC][0000:02:00.0] MSI interrupts enabled
[ 1.255576] nouveau [ PFB][0000:02:00.0] RAM type: DDR2
[ 1.255578] nouveau [ PFB][0000:02:00.0] RAM size: 256 MiB
[ 1.255579] nouveau [ PFB][0000:02:00.0] ZCOMP: 1292 tags
[ 1.256231] nouveau [ VOLT][0000:02:00.0] GPU voltage: 1320000uv
[ 1.256906] ohci-pci: OHCI PCI platform driver
[ 1.257027] ohci-pci 0000:00:02.0: OHCI PCI host controller
[ 1.257033] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 1.257064] ohci-pci 0000:00:02.0: irq 23, io mem 0xf7fff000
[ 1.295886] nouveau [ PTHERM][0000:02:00.0] FAN control: PWM
[ 1.295899] nouveau [ PTHERM][0000:02:00.0] fan management: automatic
[ 1.295926] nouveau [ PTHERM][0000:02:00.0] internal sensor: yes
[ 1.295945] nouveau [ CLK][0000:02:00.0] 20: core 459 MHz shader 918 MHz memory 400 MHz
[ 1.295981] nouveau [ CLK][0000:02:00.0] --: core 459 MHz shader 918 MHz memory 399 MHz
[ 1.296158] [TTM] Zone kernel: Available graphics memory: 4095700 kiB
[ 1.296159] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 1.296160] [TTM] Initializing pool allocator
[ 1.296165] [TTM] Initializing DMA pool allocator
[ 1.296175] nouveau [ DRM] VRAM: 256 MiB
[ 1.296176] nouveau [ DRM] GART: 1048576 MiB
[ 1.296180] nouveau [ DRM] TMDS table version 2.0
[ 1.296181] nouveau [ DRM] DCB version 4.0
[ 1.296183] nouveau [ DRM] DCB outp 00: 02000300 00000028
[ 1.296185] nouveau [ DRM] DCB outp 01: 01000302 00020030
[ 1.296186] nouveau [ DRM] DCB outp 02: 04011310 00000028
[ 1.296187] nouveau [ DRM] DCB outp 03: 010223f1 00c0c083
[ 1.296189] nouveau [ DRM] DCB conn 00: 1030
[ 1.296191] nouveau [ DRM] DCB conn 01: 0100
[ 1.296192] nouveau [ DRM] DCB conn 02: 0210
[ 1.296193] nouveau [ DRM] DCB conn 03: 0211
[ 1.296194] nouveau [ DRM] DCB conn 04: 0213
[ 1.296195] nouveau [ DRM] DCB conn 05: 0362
[ 1.303140] nouveau W[ DRM] failed to create encoder 0/1/0: -19
[ 1.303142] nouveau W[ DRM] TV-1 has no encoders, removing
[ 1.303178] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.303179] [drm] Driver supports precise vblank timestamp query.
[ 1.313349] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.313354] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.313355] usb usb2: Product: OHCI PCI host controller
[ 1.313357] usb usb2: Manufacturer: Linux 3.16.7-7-default ohci_hcd
[ 1.313358] usb usb2: SerialNumber: 0000:00:02.0
[ 1.313507] hub 2-0:1.0: USB hub found
[ 1.313515] hub 2-0:1.0: 10 ports detected
[ 1.351570] ata1.00: ATAPI: LITE-ON LTR-52327S, QS04, max UDMA/33
[ 1.351577] ata1.01: ATAPI: HL-DT-STDVD-RAM GSA-H50L, 1.00, max UDMA/66
[ 1.351582] ata1: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0c50000) ACPI=0x701f (60:30:0x15)
[ 1.351585] ata1: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc0c50000) ACPI=0x1f01f (60:30:0x15)
[ 1.367503] ata1.00: configured for UDMA/33
[ 1.383636] ata1.01: configured for UDMA/66
[ 1.402545] scsi 0:0:0:0: CD-ROM LITE-ON LTR-52327S QS04 PQ: 0 ANSI: 5
[ 1.420661] scsi 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.422067] scsi 0:0:1:0: CD-ROM HL-DT-ST DVD-RAM GSA-H50L 1.00 PQ: 0 ANSI: 5
[ 1.422989] scsi 0:0:1:0: Attached scsi generic sg1 type 5
[ 1.423068] ata2: port disabled--ignoring
[ 1.505767] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.507532] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.561357] nouveau [ DRM] MM: using CRYPT for buffer copies
[ 1.633951] nouveau [ DRM] allocated 1920x1080 fb: 0x60000, bo ffff88021b491800
[ 1.634088] fbcon: nouveaufb (fb0) is primary device
[ 1.640788] usb 1-1: New USB device found, idVendor=2013, idProduct=0258
[ 1.640789] usb 1-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 1.640790] usb 1-1: Product: PCTV 461
[ 1.640791] usb 1-1: Manufacturer: PCTV
[ 1.640792] usb 1-1: SerialNumber: 0011358374
[ 1.655757] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.664339] ata3.00: ATA-8: MAXTOR STM3500320AS, MX1A, max UDMA/133
[ 1.664341] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.680206] ata3.00: configured for UDMA/133
[ 1.680367] scsi 2:0:0:0: Direct-Access ATA MAXTOR STM350032 MX1A PQ: 0 ANSI: 5
[ 1.680586] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.680627] sd 2:0:0:0: [sda] Write Protect is off
[ 1.680629] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.680647] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.680694] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.701086] Console: switching to colour frame buffer device 240x67
[ 1.702781] nouveau 0000:02:00.0: fb0: nouveaufb frame buffer device
[ 1.702782] nouveau 0000:02:00.0: registered panic notifier
[ 1.707852] [drm] Initialized nouveau 1.1.2 20120801 for 0000:02:00.0 on minor 0
[ 1.751918] usb 1-2: new high-speed USB device number 3 using ehci-pci
[ 1.771917] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 >
[ 1.772514] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.904448] usb 1-2: New USB device found, idVendor=0c0b, idProduct=b159
[ 1.904453] usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 1.904454] usb 1-2: Product: External HDD
[ 1.904456] usb 1-2: Manufacturer: DMI
[ 1.904457] usb 1-2: SerialNumber: 00efd94f
[ 1.907497] usb-storage 1-2:1.0: USB Mass Storage device detected
[ 1.907591] scsi6 : usb-storage 1-2:1.0
[ 1.907659] usbcore: registered new interface driver usb-storage
[ 1.907903] usbcore: registered new interface driver uas
[ 1.932153] tsc: Refined TSC clocksource calibration: 3214.818 MHz
[ 2.148485] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.156786] ata4.00: ATA-8: Hitachi HTS545050B9A300, PB4OC60F, max UDMA/133
[ 2.156790] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.172829] ata4.00: configured for UDMA/133
[ 2.173036] scsi 3:0:0:0: Direct-Access ATA Hitachi HTS54505 C60F PQ: 0 ANSI: 5
[ 2.173395] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 2.173501] sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.173665] sd 3:0:0:0: [sdb] Write Protect is off
[ 2.173668] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.173700] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.468983] usb 2-3: new full-speed USB device number 2 using ohci-pci
[ 2.495234] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.643466] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 sdb12 sdb13 >
[ 2.644138] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 2.676587] sr0: scsi3-mmc drive: 46x/52x writer cd/rw xa/form2 cdda tray
[ 2.676593] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.676879] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 2.680309] usb 2-3: New USB device found, idVendor=05e3, idProduct=0604
[ 2.680314] usb 2-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.680316] usb 2-3: Product: USB Hub
[ 2.683384] hub 2-3:1.0: USB hub found
[ 2.686310] hub 2-3:1.0: 4 ports detected
[ 2.692380] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.692665] sr 0:0:1:0: Attached scsi CD-ROM sr1
[ 2.914460] scsi 6:0:0:0: Direct-Access SAMSUNG HD103SJ PQ: 0 ANSI: 2
[ 2.914856] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 2.915934] sd 6:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.918486] sd 6:0:0:0: [sdc] Write Protect is off
[ 2.918492] sd 6:0:0:0: [sdc] Mode Sense: 38 00 00 00
[ 2.921105] sd 6:0:0:0: [sdc] No Caching mode page found
[ 2.921124] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 2.933753] Switched to clocksource tsc
[ 2.935528] sdc: sdc1
[ 2.950529] sd 6:0:0:0: [sdc] Attached SCSI disk
[ 2.994778] usb 2-3.1: new low-speed USB device number 3 using ohci-pci
[ 3.009106] random: nonblocking pool is initialized
[ 3.107943] usb 2-3.1: New USB device found, idVendor=1c4f, idProduct=0034
[ 3.107948] usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.107950] usb 2-3.1: Product: Usb Mouse
[ 3.107951] usb 2-3.1: Manufacturer: SIGMACHIP
[ 3.119151] usbcore: registered new interface driver usbhid
[ 3.119155] usbhid: USB HID core driver
[ 3.119947] input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3.1/2-3.1:1.0/0003:1C4F:0034.0001/input/input3
[ 3.120032] hid-generic 0003:1C4F:0034.0001: input,hidraw0: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:00:02.0-3.1/input0
[ 3.187067] usb 2-3.2: new full-speed USB device number 4 using ohci-pci
[ 3.311222] usb 2-3.2: New USB device found, idVendor=04f9, idProduct=02c2
[ 3.311227] usb 2-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.311229] usb 2-3.2: Product: DCP-J4110DW
[ 3.311230] usb 2-3.2: Manufacturer: Brother
[ 3.311232] usb 2-3.2: SerialNumber: BROF4F284178
[ 3.314414] usb-storage 2-3.2:1.2: USB Mass Storage device detected
[ 3.314889] scsi7 : usb-storage 2-3.2:1.2
[ 4.265962] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
[ 4.265968] PM: Marking nosave pages: [mem 0xd7fb0000-0xffffffff]
[ 4.266322] PM: Marking nosave pages: [mem 0xcc000000-0xcfffffff]
[ 4.266507] PM: Basic memory bitmaps created
[ 4.287841] PM: Basic memory bitmaps freed
[ 4.291362] PM: Starting manual resume from disk
[ 4.291369] PM: Hibernation image partition 8:6 present
[ 4.291370] PM: Looking for hibernation image.
[ 4.292307] PM: Image not found (code -22)
[ 4.292311] PM: Hibernation image not present or could not be loaded.
[ 4.334792] scsi 7:0:0:0: Direct-Access Brother DCP-J4110DW 1.00 PQ: 0 ANSI: 2
[ 4.335014] sd 7:0:0:0: Attached scsi generic sg5 type 0
[ 4.415884] sd 7:0:0:0: [sdd] Attached SCSI removable disk
[ 4.436709] EXT4-fs (sda12): mounted filesystem with ordered data mode. Opts: (null)
[ 7.225525] device-mapper: uevent: version 1.0.3
[ 7.225601] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 9.474710] EXT4-fs (sda12): re-mounted. Opts: acl,user_xattr
[ 9.660251] i2c i2c-3: nForce2 SMBus adapter at 0x600
[ 9.660269] i2c i2c-4: nForce2 SMBus adapter at 0x700
[ 9.778671] MCE: In-kernel MCE decoding enabled.
[ 9.779110] EDAC MC: Ver: 3.0.0
[ 9.780630] AMD64 EDAC driver v3.4.0
[ 9.780664] EDAC amd64: DRAM ECC disabled.
[ 9.780670] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 9.801649] parport_pc 00:01: reported by Plug and Play ACPI
[ 9.801703] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 9.804181] kvm: Nested Virtualization enabled
[ 9.804185] kvm: Nested Paging enabled
[ 9.869307] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 23
[ 9.869321] snd_hda_intel 0000:00:05.0: Disabling MSI
[ 9.976176] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 10.005450] Linux video capture interface: v2.00
[ 10.023841] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 10.167098] ppdev: user-space parallel port driver
[ 10.215018] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 10.215276] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
[ 10.337832] usblp 2-3.2:1.0: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x02C2
[ 10.337859] usbcore: registered new interface driver usblp
[ 10.476863] sound hdaudioC0D0: autoconfig: line_outs=1 (0x1c/0x0/0x0/0x0/0x0) type:line
[ 10.476867] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 10.476870] sound hdaudioC0D0: hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
[ 10.476871] sound hdaudioC0D0: mono: mono_out=0x0
[ 10.476872] sound hdaudioC0D0: inputs:
[ 10.476874] sound hdaudioC0D0: Rear Mic=0x1a
[ 10.476875] sound hdaudioC0D0: Front Mic=0x1e
[ 10.476877] sound hdaudioC0D0: Line=0x1b
[ 10.476878] sound hdaudioC0D0: CD=0x1f
[ 10.591822] bttv: driver version 0.9.19 loaded
[ 10.591827] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 10.591862] bttv: Bt8xx card found (0)
[ 10.592089] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 18
[ 10.592109] bttv: 0: Bt878 (rev 17) at 0000:01:08.0, irq: 18, latency: 32, mmio: 0xdffff000
[ 10.592122] bttv: 0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
[ 10.592123] bttv: 0: using: Hauppauge (bt878) [card=10,autodetected]
[ 10.594667] bttv: 0: Hauppauge/Voodoo msp34xx: reset line init [5]
[ 10.625880] tveeprom 5-0050: Hauppauge model 44804, rev D183, serial# 7478518
[ 10.625896] tveeprom 5-0050: tuner model is TCL 2002MB 3 (idx 83, type 37)
[ 10.625898] tveeprom 5-0050: TV standards PAL(B/G) PAL(D/D1/K) (eeprom 0x44)
[ 10.625899] tveeprom 5-0050: audio processor is None (idx 0)
[ 10.625900] tveeprom 5-0050: has no radio
[ 10.625902] bttv: 0: Hauppauge eeprom indicates model#44804
[ 10.625903] bttv: 0: tuner type=37
[ 10.648131] bttv: 0: audio absent, no audio device found!
[ 10.654416] tuner 5-0061: Tuner -1 found with type(s) Radio TV.
[ 10.656523] tuner-simple 5-0061: creating new instance
[ 10.656527] tuner-simple 5-0061: type set to 37 (LG PAL (newer TAPC series))
[ 10.657853] bttv: 0: Setting PLL: 28636363 => 35468950 (needs up to 100ms)
[ 10.692804] bttv: PLL set ok
[ 10.693567] bttv: 0: registered device video0
[ 10.693594] bttv: 0: registered device vbi0
[ 10.737967] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr bc:5f:f4:01:da:71
[ 10.737975] forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3
[ 10.847845] fuse init (API version 7.23)
[ 11.174491] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input5
[ 11.174548] input: HDA NVidia Line as /devices/pci0000:00/0000:00:05.0/sound/card0/input6
[ 11.174596] input: HDA NVidia Line Out as /devices/pci0000:00/0000:00:05.0/sound/card0/input7
[ 11.773158] em28xx: New device PCTV PCTV 461 @ 480 Mbps (2013:0258, interface 0, class 0)
[ 11.773163] em28xx: DVB interface 0 found: isoc
[ 11.773366] em28xx: chip ID is em28178
[ 12.060070] Adding 2096444k swap on /dev/sda6. Priority:-1 extents:1 across:2096444k FS
[ 12.144843] em28178 #0: EEPROM ID = 26 00 01 00, EEPROM hash = 0x003c7ba0
[ 12.144848] em28178 #0: EEPROM info:
[ 12.144849] em28178 #0: microcode start address = 0x0004, boot configuration = 0x01
[ 12.153433] em28178 #0: AC97 audio (5 sample rates)
[ 12.153438] em28178 #0: 500mA max power
[ 12.153440] em28178 #0: Table at offset 0x27, strings=0x148c, 0x1874, 0x0a6a
[ 12.153502] em28178 #0: Identified as PCTV DVB-S2 Stick (461e) (card=92)
[ 12.153504] em28178 #0: dvb set to isoc mode.
[ 12.153537] usbcore: registered new interface driver em28xx
[ 12.156557] em28178 #0: Binding DVB extension
[ 12.163519] i2c i2c-7: Added multiplexed i2c bus 8
[ 12.186742] m88ts2022 8-0060: m88ts2022: Montage M88TS2022 successfully identified
[ 12.189491] i2c i2c-7: a8293: Allegro A8293 SEC attached
[ 12.189498] DVB: registering new adapter (em28178 #0)
[ 12.189505] usb 1-1: DVB: registering adapter 0 frontend 0 (Montage M88DS3103)...
[ 12.192070] em28178 #0: DVB extension successfully initialized
[ 12.192075] em28xx: Registered (Em28xx dvb Extension) extension
[ 12.193940] em28178 #0: Registering input extension
[ 12.219462] Registered IR keymap rc-pinnacle-pctv-hd
[ 12.219565] input: em28xx IR (em28178 #0) as /devices/pci0000:00/0000:00:02.1/usb1/1-1/rc/rc0/input8
[ 12.219638] rc0: em28xx IR (em28178 #0) as /devices/pci0000:00/0000:00:02.1/usb1/1-1/rc/rc0
[ 12.220753] em28178 #0: Input extension successfully initalized
[ 12.220757] em28xx: Registered (Em28xx Input Extension) extension
[ 12.454896] REISERFS (device sda7): found reiserfs format "3.6" with standard journal
[ 12.454916] REISERFS (device sda7): using ordered data mode
[ 12.454917] reiserfs: using flush barriers
[ 12.455329] REISERFS (device sda7): journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 12.455974] REISERFS (device sda7): checking transaction log (sda7)
[ 12.676169] floppy0: no floppy controllers found
[ 12.716364] REISERFS (device sda7): replayed 1 transactions in 1 seconds
[ 12.906646] EXT4-fs (sdb11): mounted filesystem with ordered data mode. Opts: (null)
[ 13.072019] REISERFS (device sdb7): found reiserfs format "3.6" with standard journal
[ 13.072035] REISERFS (device sdb7): using ordered data mode
[ 13.072037] reiserfs: using flush barriers
[ 13.082875] REISERFS (device sdb7): journal params: device sdb7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 13.083479] REISERFS (device sdb7): checking transaction log (sdb7)
[ 13.137974] REISERFS (device sdb9): found reiserfs format "3.6" with standard journal
[ 13.137996] REISERFS (device sdb9): using ordered data mode
[ 13.137997] reiserfs: using flush barriers
[ 13.146393] REISERFS (device sdb9): journal params: device sdb9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 13.146998] REISERFS (device sdb9): checking transaction log (sdb9)
[ 13.161634] EXT4-fs (sdb10): mounted filesystem with ordered data mode. Opts: (null)
[ 13.216506] REISERFS (device sdb8): found reiserfs format "3.6" with standard journal
[ 13.216527] REISERFS (device sdb8): using ordered data mode
[ 13.216528] reiserfs: using flush barriers
[ 13.224381] REISERFS (device sdb8): journal params: device sdb8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 13.225035] REISERFS (device sdb8): checking transaction log (sdb8)
[ 13.255318] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null)
[ 13.294456] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[ 13.317312] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 13.326626] REISERFS (device sda7): Using r5 hash to sort names
[ 13.396779] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 13.402567] REISERFS (device sdb7): Using r5 hash to sort names
[ 13.447206] REISERFS (device sdb8): Using r5 hash to sort names
[ 13.492059] REISERFS (device sdb9): Using r5 hash to sort names
[ 13.629214] REISERFS (device sda8): found reiserfs format "3.6" with standard journal
[ 13.629231] REISERFS (device sda8): using ordered data mode
[ 13.629232] reiserfs: using flush barriers
[ 13.629600] REISERFS (device sda8): journal params: device sda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 13.630196] REISERFS (device sda8): checking transaction log (sda8)
[ 13.942053] REISERFS (device sda9): found reiserfs format "3.6" with standard journal
[ 13.942070] REISERFS (device sda9): using ordered data mode
[ 13.942071] reiserfs: using flush barriers
[ 13.942556] REISERFS (device sda9): journal params: device sda9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 13.943151] REISERFS (device sda9): checking transaction log (sda9)
[ 14.026342] REISERFS (device sda8): Using r5 hash to sort names
[ 14.048723] REISERFS (device sda9): Using r5 hash to sort names
[ 14.419281] EXT4-fs (sda11): mounted filesystem with ordered data mode. Opts: (null)
[ 15.571079] audit: type=1400 audit(1431926381.069:2): apparmor="STATUS" operation="profile_load" name="/{usr/,}bin/ping" pid=751 comm="apparmor_parser"
[ 15.581901] audit: type=1400 audit(1431926381.081:3): apparmor="STATUS" operation="profile_load" name="/sbin/klogd" pid=758 comm="apparmor_parser"
[ 15.589487] audit: type=1400 audit(1431926381.089:4): apparmor="STATUS" operation="profile_load" name="/sbin/syslog-ng" pid=762 comm="apparmor_parser"
[ 15.596991] audit: type=1400 audit(1431926381.097:5): apparmor="STATUS" operation="profile_load" name="/sbin/syslogd" pid=766 comm="apparmor_parser"
[ 15.605458] audit: type=1400 audit(1431926381.105:6): apparmor="STATUS" operation="profile_load" name="/usr/bin/lessopen.sh" pid=771 comm="apparmor_parser"
[ 15.614355] audit: type=1400 audit(1431926381.113:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2" pid=775 comm="apparmor_parser"
[ 15.614361] audit: type=1400 audit(1431926381.113:8): apparmor="STATUS" operation="profile_load" name="DEFAULT_URI" pid=775 comm="apparmor_parser"
[ 15.614364] audit: type=1400 audit(1431926381.113:9): apparmor="STATUS" operation="profile_load" name="HANDLING_UNTRUSTED_INPUT" pid=775 comm="apparmor_parser"
[ 15.614366] audit: type=1400 audit(1431926381.113:10): apparmor="STATUS" operation="profile_load" name="phpsysinfo" pid=775 comm="apparmor_parser"
[ 15.621509] audit: type=1400 audit(1431926381.121:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/anvil" pid=779 comm="apparmor_parser"
[ 16.159630] NET: Registered protocol family 17
[ 18.958924] No iBFT detected.
[ 19.193464] forcedeth 0000:00:07.0: irq 44 for MSI/MSI-X
[ 19.193498] forcedeth 0000:00:07.0 eth0: MSI enabled
[ 45.438958] i2c i2c-7: m88ds3103: found a 'Montage M88DS3103' in cold state
[ 45.489655] i2c i2c-7: m88ds3103: downloading firmware from file 'dvb-demod-m88ds3103.fw'
[ 45.753900] i2c i2c-7: m88ds3103: found a 'Montage M88DS3103' in warm state
[ 45.753905] i2c i2c-7: m88ds3103: firmware version 3.B
[ 49.469462] Bluetooth: Core ver 2.19
[ 49.469483] NET: Registered protocol family 31
[ 49.469485] Bluetooth: HCI device and connection manager initialized
[ 49.469492] Bluetooth: HCI socket layer initialized
[ 49.469494] Bluetooth: L2CAP socket layer initialized
[ 49.469503] Bluetooth: SCO socket layer initialized
[ 49.473696] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 49.473700] Bluetooth: BNEP filters: protocol multicast
[ 49.473708] Bluetooth: BNEP socket layer initialized
Code:
Module Size Used by
bnep 19624 2
bluetooth 479177 5 bnep
6lowpan_iphc 18702 1 bluetooth
rfkill 26772 2 bluetooth
iscsi_ibft 12862 0
iscsi_boot_sysfs 16000 1 iscsi_ibft
af_packet 40034 0
reiserfs 258505 6
rc_pinnacle_pctv_hd 12529 0
em28xx_rc 17641 0
a8293 12855 1
m88ts2022 18258 1
m88ds3103 23845 1
i2c_mux 12896 1 m88ds3103
em28xx_dvb 31985 3
dvb_core 129753 2 em28xx_dvb,m88ds3103
em28xx 84619 2 em28xx_dvb,em28xx_rc
fuse 100461 5
tuner_simple 26464 1
tuner_types 24636 1 tuner_simple
tuner 27358 1
tda7432 13260 0
tvaudio 33537 0
msp3400 40283 0
bttv 151594 0
snd_hda_codec_via 27860 1
snd_hda_codec_generic 77129 1 snd_hda_codec_via
usblp 18756 0
btcx_risc 13640 1 bttv
tveeprom 21216 2 bttv,em28xx
videobuf_dma_sg 19262 1 bttv
serio_raw 13434 0
forcedeth 71521 0
ppdev 17671 0
shpchp 32951 0
rc_core 32765 4 bttv,em28xx_rc,rc_pinnacle_pctv_hd
v4l2_common 15265 6 bttv,tuner,tda7432,em28xx,msp3400,tvaudio
videodev 157329 7 bttv,tuner,tda7432,em28xx,msp3400,tvaudio,v4l2_common
videobuf_core 30119 2 bttv,videobuf_dma_sg
pcspkr 12718 0
snd_hda_intel 34475 3
snd_hda_controller 35103 1 snd_hda_intel
snd_hda_codec 151970 4 snd_hda_codec_via,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
snd_hwdep 13602 1 snd_hda_codec
snd_pcm 116916 3 snd_hda_codec,snd_hda_intel,snd_hda_controller
snd_timer 33609 1 snd_pcm
snd 87947 13 snd_hwdep,snd_timer,snd_hda_codec_via,snd_pcm,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
parport_pc 41414 0
kvm_amd 64385 0
k10temp 13144 0
edac_core 66387 0
edac_mce_amd 22578 0
kvm 493230 1 kvm_amd
soundcore 15047 2 snd,snd_hda_codec
i2c_nforce2 13234 0
parport 46395 2 ppdev,parport_pc
processor 40484 0
dm_mod 111114 0
hid_generic 12559 0
usbhid 52574 0
sr_mod 22416 0
cdrom 60734 1 sr_mod
uas 27255 0
usb_storage 62302 2 uas
ohci_pci 13570 0
nouveau 1304774 3
video 24419 1 nouveau
mxm_wmi 13021 1 nouveau
wmi 19193 2 mxm_wmi,nouveau
i2c_algo_bit 13413 2 bttv,nouveau
ata_generic 12923 0
drm_kms_helper 65670 1 nouveau
ttm 93506 1 nouveau
drm 335594 6 ttm,drm_kms_helper,nouveau
ehci_pci 12914 0
ohci_hcd 51577 1 ohci_pci
ehci_hcd 79604 1 ehci_pci
sata_nv 31853 15
pata_amd 18230 0
usbcore 256127 10 uas,usblp,em28xx_dvb,usb_storage,em28xx,ohci_hcd,ohci_pci,ehci_hcd,ehci_pci,usbhid
usb_common 13057 1 usbcore
button 13971 1 nouveau
sg 40630 0
Code:
Bus 001 Device 003: ID 0c0b:b159 Dura Micro, Inc. (Acomdata)
Bus 001 Device 002: ID 2013:0258 PCTV Systems
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 004: ID 04f9:02c2 Brother Industries, Ltd
Bus 002 Device 003: ID 1c4f:0034 SiGma Micro
Bus 002 Device 002: ID 05e3:0604 Genesys Logic, Inc. USB 1.1 Hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Kaffeine sagt allerdings, auch wenn das Gerät in den Einstellungen angezeigt wird, "No device found"
Auch w_scan sagt
Code:
w_scan
w_scan version 20140727 (compiled for DVB API 5.10)
guessing country 'DE', use -c <country> to override
using settings for GERMANY
DVB aerial
DVB-T Europe
scan type TERRESTRIAL, channellist 4
output format vdr-2.0
output charset 'UTF-8', use -C <charset> to override
Info: using DVB adapter auto detection.
main:3886: FATAL: ***** NO USEABLE TERRESTRIAL CARD FOUND. *****
Please check wether dvb driver is loaded and
verify that no dvb application (i.e. vdr) is running.
0 commentaires:
Enregistrer un commentaire